testo 410-2 – Vane anemometer

The pocket-sized vane anemometer testo 410-2 is ideal for quick check readings at ventilation grilles and outside thanks to its convenient configuration. Even low air velocities between 0.4 and 20 m/s can be measured with the permanently installed vane (diameter 30 mm). An NTC temperature sensor with a measurement range of -10 to +50 °C and a Testo humidity sensor with long-term stability are both included in the anemometer. As a result, you may use this to accurately measure the temperature and humidity of the air.The Beaufort wind force, the wind chill temperature, the dew point, and other data are all displayed on the anemometer Testo 410-2 at the press of a button. The wind chill temperature is the temperature that a human perceives owing to wind-related cooling. The anemometer offers useful accessories and functions We have added a clip-on protective cap to the vane anemometer. If you don’t use testo 410-2 right away, this provides trustworthy defence. The fitting wrist strap can be used during the measurement to keep the anemometer from falling. Take a look at the useful functions offered by the anemometer testo 410-2:

Single-point averaging: calculation of the mean air velocity, for example at ventilation grilles (air outlets) Hold function: enables the current measurement data relating to air velocity, humidity and air temperature to be recorded and compared with each other Max/min values: displays the minimum or maximum values since the vane anemometer was last switched on or reset Illuminated display: read off your readings quickly and easily, even if visibility is poor Selectable units: air velocity: m/s, km/h, fpm, mph, kts and Beaufort; air temperature: °C, °F and wind chill; humidity: relative humidity, wet bulb and dew point temperature